PRESSURE:

3500 PSI MAXIMUM.

VOLUME:

4.0 GALLONS PER MINUTE MAXIMUM.

TEMPERATURE:  

VARIABLE, AMBIENT TO 185 DEGREES F, MAX WITH 100 DEGREES F RISE.

DRIVER:

BALDOR 10 HP, THREE PHASE, C-FACE, 480 VOLT, 60Hz, 1800 RPM, HAZARDOUS LOCATION, ELECTRIC MOTOR, MEETS CLASS I, DIVISION I AND II REQUIREMENTS.

PUMP:

UNIQUE HIGH TEMPERATURE TRIPLEX, OIL BATH, CERAMIC  PLUNGER, STAINLESS STEEL VALVES, 1800 RPM, DIRECT-COUPLED DRIVE  (5 YEAR WARRANTY)

HEATER:

INDUSTRIAL INCOLOY-SHEATHED, MULTIPLE-ELEMENT, 75 KILOWATT, 3 PHASE, 60Hz, 480 VOLT, STAINLESS STEEL ENCLOSURE, HEAT EXCHANGER PRODUCED FROM 300' STAINLESS STEEL PIPE WITH 1/2" ID.

FRAME:

STATE OF THE ART, ALL STAINLESS STEEL FRAME, CAGE PROTECTION WITH CHOICE OF CENTER OR FOUR POINT LIFTING EYE.  DIMENSIONS: 36"W X 48"L X 52"H.  APPROXIMATE WEIGHT: 1450 LBS.

STORAGE:

STAINLESS STEEL HIGH PRESSURE HOSE REEL, 200' CAPACITY.

WATER INLET:

FRESH WATER, POSITIVE FEED WITH 20 MICRON ELEMENT.  CROWSFOOT CONNECTION.

DISCHARGE:

100' OF 5800 PSI PRESSURE HOSE WITH QUICK CONNECTS, DUAL LANCE TRIGGER DUMP GUN WITH PRESSURE NOZZLE ASSORTMENT.

CONTROLS:

ADJUSTABLE SOAP METERING VALVE, PRESSURE AND TEMPERATURE RELIEF VALVE, ZERO PRESSURE UNLOADER VALVE, HIGH TEMPERATURE SHUTDOWN, HEATER SAFETY SHUTDOWN, THERMOSTAT FOR PRECISE TEMPERATURE REGULATION, MOTOR STARTER WITH OVERLOAD PROTECTION.  LOW WATER SHUTDOWN SWITCH, ON/OFF FOR PUMP AND HEATER.  ALL MOUNTED IN EXPLOSION-PROOF ENCLOSURE, MINIMUM 85 AMP SERVICE REQUIRED.  OUR UNITS MEET UL1776, CSA A22.2 NO. 68-92 STANDARDS.

NOTE:

ALL STAINLESS STEEL COMPONENTS ARE WARRANTED AGAINST RUST OR BURN THROUGH FO THE LIFE OF THE EQUIPMENT.  WE STRIVE TO ADHERE TO OUR SPECIFICATIONS, BUT DUE TO VARIATIONS IN THE COMPONENTS, SPECIFICATIONS ARE + OR - 5%.  WE RESERVE THE TIGHT TO MAKE DESIGN CHANGES THAT WILL IMPROVE THE PERFORMANCE OR QUALITY OF OUR EQUIPMENT.